BJC-85
BJC-85W
SERVICE
MANUAL
Canon
REFERENCE MANUAL
Oct. 1999
Table of content
Page
1
1. PRODUCT OUTLINE
1
2. CHANGES FROM THE BJC-80/80v
1
3. EXTERNAL APPEARANCE
2
4. SPECIFICATIONS
2
4.1 PRINTER SPECIFICATIONS
3
4.2 INTERFACE SPECIFICATIONS
6
4.3 PAPER SPECIFICATIONS
7
4.4 PHOTO BJ CARTRIDGE SPECIFICATIONS
8
5. OPERATION
8
5-1. FUNCTION SETTING
10
5.2 ERROR INDICATIONS
11
5-3. INK LOW WARNING RESET BY BUTTON OPERATION
12
5-4. DIRECT PRINTING FUNCTION OF THE IMAGE FROM DIGITAL CAMERAS
13
6. SPECIAL TOOLS
14
7. PARTS LIST
15
8. CIRCUIT DIAGRAM
1. PRODUCT OUTLINE
The BJ M70 and the BJC-85 are portable, color BJ printers targeting the personal use
market. As successive models of the BJC-80/80v, the following functions have been
added, the ease of connection has been improved, and the functions as a portable space-
saving printer has been strengthened.
(1)
The high-speed IrDA (Ver.1.1) enables the printer to attain print speed comparable
to that of the Centronics interface.
(2)
Direct printing from digital cameras by the new standards of IrTran-P.
(3)
Support of the USB I/F function.
(4)
Photo printing function is added.
2. CHANGES FROM THE BJC-80/80v
1)
New adoption of the photo cartridge (Photo printing function is added.)
2)
The IrDA version upgrade from Ver. 1.0 to 1.1 has enabled faster transmission.
3)
New adoption of IrTranP (Direct printing from digital cameras, enabled only in BJ M70).
4)
New adoption of USB I/F
5)
One emulation (BJC-85: LQ mode / BJ M70: BJ mode)
6)
Button reset of the ink low warning is added.
7)
Various specifications / Circuit diagram
8)
Special tool (spur cleaner) is added.
3. EXTERNAL APPEARANCE
The BJ M70 and the BJC-85 have the same appearance as the BJC-80/80v, except for
the following:
(1) The USB I/F connector has been added to the right side of the printer.
(2) The color of the panel cover and inner cover has been changed from gray to blue.
1
USB Connector
Changed from gray to blue.
4. SPECIFICATIONS
4-1. PRIINTER SPECIFICATIONS
Type
Portable serial color bubble jet printer
Paper feeding
Auto sheet feed
method
Printing speed
Burst HS: 434cps HQ: 346cps (when using the BC-10)
Throughput:
BC-10
New monochrome pattern (E)
5 ppm(HS) 3.9 ppm(Standard)
New monochrome pattern (J)
5 ppm(HS) 4.3 ppm(Standard)
BC-11e
New color pattern (E)
2 ppm(HS) 1.6 ppm(Standard)
New color pattern (J)
2 ppm(HS) 1.7 ppm(Standard)
BC-12e
A4 full address
1.0ppm (HQ)
Printing direction
Unidirectional (automatically selected according to the print data)
Max. Print Width
203 mm
Line feed pitch
136 ms/line (128" /360" line feed)
Built-in print
LQ mode: BJC-85 only
control mode
BJ mode: BJ M70 only
Native mode
BJL command
Detection functions Presence of paper: Available
Presence of BJ cartridge: Available
Waste ink amount: Available
Paper width: Not available
Distinction of BJ cartridge: Available
Ink low: Available (by using the dot-count)
Noise
Sound pressure level: conforms to ISO9296
Approx. 45 dB (A) or less during operation (HQ/HS mode)
Environmental
During operation
Temperature 5oC to 35oC (41oF to 95oF)
requirements
Humidity
10%RH to 90%RH (no condensation)
Non operation
Temperature 0oC to 35oC (32oF to 95oF)
Humidity
5%RH to 95%RH (no condensation)
Power supply
Input voltage/Frequency:
AC100 V, 50/60 Hz AC120 V, 60 Hz AC230 V, 50 Hz AC240 V, 50 Hz
Power consumption
Printing status
Standby status Soft power off
Max. 30 W
3 W
2 W
External
300 mm (W) x 157.6 mm (D) x 57 mm (H)
dimensions
Weight
Approx. 1.4 Kg (including BJ cartridge)
2