© 1999 CANON INC. CANON BJC-6500 1099 SE 0.30-0 PRINTED IN JAPAN (IMPRIME AU JAPON)
1099 SE 0.30-0
This manual is published by Canon Inc. for qualified persons and contains the necessary technical
information for technical theory, installation, maintenance, and repair of products. This manual covers
all localities where the products are sold. For this reason, it may contain information that does not
apply to your locality.
This manual may include technical inaccuracies or typographical errors due to improvements or
changes in the products. When amendments are made to the content of this manual, Canon will issue
technical information as the need arises. In the event of major alterations to the content of this manual
over a long or short period, Canon will publish a revised version of the manual.
The following paragraphs do not apply to any countries where such provisions are
inconsistent with local law.
The product names and company names appearing in this manual are the registered trademarks or
trademarks of the individual companies.
This manual is copyrighted and all rights reserved. Under the copyright laws, this manual may not be
copied, reproduced, or translated into other languages, in whole or in part, without the express written
consent of Canon Inc. except in the case of internal business use.
© 1999 by Canon Inc.
BJ Products Quality Support Dept.
16-1, Shimonoge 3-chome, Takatsu-ku, Kawasaki-shi, Kanagawa 213, Japan
This manual was produced on an Apple Macintosh
TM Power Mac 9600/233 personal computer and Apple
TM II NTX-J laser beam printer; final pages were printed on VarityperTM 5300 with 4000-J RIP.
A Canon mo-5001S Magneto-Optical Storage Subsystem with mo-502M Magneto-Optical Storage Disk
Cartridge and mo-IF2 interface kit were used for storing large volumes of page layout and graphic data
for this manual.
All graphics were produced with MACROMEDIA FREEHAND
All documents and all page layouts were created with QuarkXPress
I. ABOUT THIS MANUAL
This manual is divided into five parts containing the information required for servicing the
Part 1: PRODUCT SPECIFICATIONS
This part outlines the product and its specifications.
Part 2: MAINTENANCE
This part explains maintenance of the unit. It includes precautions and details for
disassembly and assembly, and adjustments required when assembling.
Part 3: OPERATION
This part explains how to operate the unit properly, and how to use the service mode.
Part 4: TROUBLESHOOTING
This part explains how to resolve problems of the unit, and contains information on
how to locate and replace serviceable units and parts. It is divided into two sections:
"Troubleshooting by Errors" and "Troubleshooting by Symptoms."
Part 5: REFERENCE
This part outlines the unit operation giving technical information on hardware, and
contains block diagrams, pin assignments, and wiring/circuit diagrams.
This manual does not contain complete information required for
disassembling and assembling the BJC-6500 printer. Please also refer to the
separate Parts Catalog.