© 1998 CANON INC. CANON BJC-1000 1298 SC 0.40-0 PRINTED IN JAPAN (IMPRIME AU JAPON)
1298 SC 0.40-0
This manual has been issued by Canon Inc. for qualified persons to learn technical theory, installation,
maintenance, and repair of products. This manual covers all localities where the products are sold. For
this reason, there may be information in this manual that does not apply to your locality.
This manual could include technical inaccuracies or typographical errors due to improvements or
changes in the products. When changes occur in applicable products or in the content of this manual,
Canon will release technical information as the need arises.
In the event of major changes in the
contents of this manual over a long or short period, Canon will issue a new edition of this manual.
The following paragraph does not apply to any countries where such provisions are
inconsistent with local law.
The product names and company names described in this manual are the registered trademarks of the
This manual is copyrighted with all rights reserved. Under the copyright laws, this manual may not be
copied, reproduced or translated into another language, in whole or in part, without the written consent
of Canon Inc., except in the case of internal business use.
© 1998 by Canon Inc.
BJ Products Technical Support Dept
16-1, Shimonoge 3-chome, Takatsu-ku, Kawasaki-shi, Kanagawa 213-8512, Japan
This manual was produced on an Apple Macintosh
TM Power Mac 8500/180 personal computer and Apple
TM16/600PS-J laser beam printer; final pages were printed on VarityperTM 5300 with 4000-J
RIP. All graphics were produced with MACROMEDIA
® FREEHAND® 7.0J.
All documents and all page layouts were created with QuarkXPress
I. ABOUT THIS MANUAL
This manual is divided into five sections, and contains information required for servicing
Part 1: Safety and Precautions
This section tells you how to service the unit safely. It is very important, so please read
Part 2: Product Specifications
This section outlines the products specifications.
Part 3: Operating Instructions
This section explains how to operate the unit properly, and contains information
required for installation and service.
Part 4: Technical Reference
This section outlines the way the unit operates so you can understand it technically.
Part 5: Maintenance
This section explains how to maintain the unit. Descriptions of assembly/disassembly,
adjustment for assembly, troubleshooting procedures, and wiring/circuit diagrams are
Procedures for assembly/disassembly are not given in this manual.
See the illustrations in the separate Parts Catalog.